spec no: dsaa9587 rev no: v.7 date: nov/26/2010 page: 1 of 4 approved: wynec checked: allen liu drawn: c.h.han erp : 1201000038 11mm x 1.4mm side view part number: ka-1114/2syc-cc-l5 super bright yellow features z low power consumption. z ideal for backlighting. z rohs compliant. description the super bright yellow device is made with algainp (on gaas substrate) light emitting diode chip. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsaa9587 rev no: v.7 date: nov/26/2010 page: 2 of 4 approved: wynec checked: allen liu drawn: c.h.han erp : 1201000038 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 ka-1114/2syc-cc-l5 super bright yellow (algainp) water clear 80 150 120 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength super bright yellow 590 nm i f =20ma d [1] dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half-width super bright yellow 28 nm i f =20ma c capacitance super bright yellow 25 pf v f =0v;f=1mhz v f [2] forward voltage super bright yellow 2 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsaa9587 rev no: v.7 date: nov/26/2010 page: 3 of 4 approved: wynec checked: allen liu drawn: c.h.han erp : 1201000038 super bright yellow ka-1114/2syc-cc-l5
spec no: dsaa9587 rev no: v.7 date: nov/26/2010 page: 4 of 4 approved: wynec checked: allen liu drawn: c.h.han erp : 1201000038 packing & label specifications ka-1114/2syc-cc-l5
|
